Support
+7 812 679 37 73
EnglishEnglish

Converter

Rust-to-ground, 200 ml

EASY TO USE
PENETRATES DEEEPLY
CONVERTS RUST
PREVENTS CORROSION
NO PRECOATING REQUIRED
It is intended to convert the hard-to-remove rust to the ground before lacquer application. Perfectly removes rust and ensures corrosion resistance. Converts water-insoluble zinc phosphatic ground from gray to black. Prevents electrochemical corrosion under paint layer. No pre-coating required before painting. Perfect solution for repair of vehicles and agricultural machinery, treatment of garages, roofs, fences, metal structures, other equipment for preservation.
Recommendation for use

1. Clear dirt, lubrication and loose rust off the metal surface;
2. MAKE SURE to shake the flask before use and apply to the treated site using a brush or a paint roller.
3. Hold for at least 30 minutes until drying, avoid moisture ingress;
4. For better effect, clear the formed ground in a mechanical way and repeat treatment.
5. Paint in 24 hours after drying.
It is recommended to use at the ambient temperature of no less than +15°С. Consumption makes approximate 1flask per 2 sq.m depending on the rust layer thickness.

Composition

Water, phosphoric acid not more than 25%, surfactants, processing additives.

Characteristics
Volume:
200 ml
Item number:
NPGPR0015
TU:
0254-004-53258431-2016
Service and shelf life

The warranty storage period is 24 months from the date of manufacture. Keep closed, in a dry, dark place, at the temperature of no more than +25°С. Dispose as domestic waste.

Safety measures

Avoid solution ingestion and eyes and skin contact. In case of eyes and skin contact, rinse with a plenty of flowing water. Keep out of the reach of children!