Colorless, 10 g
Recommendation for use
1. Clear the binding surfaces off dirt (dust, oil stains, rust), make sure to grind with coarse abrasive cloth, degrease (acetone, white spirit, etc.) and dry in air for 15-20 min.
2. Squeeze the required amount of the composition from both flasks, in equal proportions, to a dry, clean surface (plastic or wood), carefully mix until the homogeneous mass is obtained.
3. Apply the resulting mixture to both binding surfaces or repair point, press down and fix for 2-3 hours.
4. Mixture life time is 1-1.5 hours at +20°С.
5. Mixture hardening time is 2-3 hours at +20°С. Mutual fixation of the binding parts is required for this period of time.
6. After 24 hours, the binding point can be loaded and machined.
The operating temperature range of the repaired product is from -60 ° C to + 150 ° C.
Epoxy resins, hardener, plasticizers.
- 10 g
- Item number:
Service and shelf life
Keep in a dark place at the temperature not higher than +25 °С. Shelf life - 24 months.
Avoid eye contact. In case of eye contact, rinse eyes with flowing water for 5-10 minutes. After work, wash your hands with soapy water. Keep out of the reach of children! Dispose as domestic waste.